Control Force Data

Control Force Options

Kaz Technologies offers you five different compression and five different rebound valve code choices.  Choose any combination of compression or rebound codes to obtain the desired damping for your vehicle.

You can also re-valve the shock to obtain any force you desire!  To do this, order a Laguna or Daytona Valving Development kit for all the valving parts and tools you need.

Below is a graph of the standard Compression and Rebound valve codes.

 

Raw Data Viewer

The raw data files linked below were captured on a Roehrig Dyno.

To download the Roehrig software, click here!

 Control Force

NOTE: Above curves are at mid adjustment settings in both compression and rebound

Above graph in .pdf format

Download raw data for Code 1 (midpoint of adjustment)
Download raw data for Code 2 (midpoint of adjustment)
Download raw data for Code 3 (midpoint of adjustment)
Download raw data for Code 4 (midpoint of adjustment)
Download raw data for Code 5 (midpoint of adjustment)

Adjustment Ranges

Each valve code has a wide range of adjustment.  Below are the sweep adjustment graphs for each of the five rebound and compression valve codes.  Remember, you may choose any combination of compression and rebound codes.

Standard Code 1

Download raw data for Code 1 Adjustment Sweeps

Standard Code 2

Download raw data for Code 2 Adjustment Sweeps

Standard Code 3

Download raw data for Code 3 Adjustment Sweeps

Standard Code 4

Download raw data for Code 4 Adjustment Sweeps

Standard Code 5

Download raw data for Code 5 Adjustment Sweeps

TOP