DYno TestiNG YOUR SHOCKS
We dyno test any make and model of shock
Make sure your shocks are performing properly with Kaz Tech Shock Services
See "Contact" for shipping information
Dyno test 4 shocks at 1 adjustment setting
Verify that your shocks are in good working condition and performing properly!
We will dyno test each of the shocks as received. You set the adjusters to your settings. This test will show how well the forces match between the shocks, and if the shocks are performing properly. From the data you can determine if the shocks are performing properly or needs to be replaced. A report on shock condition and performance will be included with the data.
We have clevis mounts to test most racing shocks with mono ball ends. Please call or write about other fixtures.
Price: $145
Send an email to tjaworski@kaztechnologies.com for details
Dyno test 4 shocks at 3 adjustment settings
Test your shocks at three adjustment settings to see the range of forces available.
We will first test each of the shocks as received. Then, we will test each shock at the low, mid and high adjustment settings. This will provide you with the force data at your starting settings, and information on the range of forces available from your dampers. A report on shock condition and performance will be included with the data.
We have clevis mounts to test most racing shocks with mono ball ends. Please call or write about other fixtures.
Price: $245
Send an email to tjaworski@kaztechnologies.com for details
Dyno Test 4 shocks with force matching and adjustment sweeps
Force match your shocks for optimum performance!
We will dyno test each of the shocks as received, then tune the adjusters so the forces match on all 4 shocks. This will provide you with a starting point for each shock and the knowledge that all shocks are performing the same!
In addition to force matching the shocks, we will run a full adjustment sweep of all adjusters on one shock. From this data you can determine what setting gives you what damping force. You will also know how much to change the settings for the desired change in damping. A report on shock condition and performance will be included with the data.
We have clevis mounts to test most racing shocks with mono ball ends. Please call or write about other fixtures.
Price: $275
Send an email to tjaworski@kaztechnologies.com for details
Dyno test 4 shocks with track data
Test your shocks with the same input they see on the race track for your best performance!
We convert your vehicle data into a shock dyno test so we can analyze how your shock actually performs on the car. With this data you are able to analyze response, lag and hysteresis. A summary report on the results will be included with the data.We test the shocks as received. You supply shock displacement data recorded from the track. The data acquisition rate must be at least 100 Hz. We recommend a data acquisition rate of 250 Hz for best results. For a complete description of requirements, please read the Kaz Technologies Shock Service Requirements.
We have clevis mounts to test most racing shocks with mono ball ends. Please call or write about other fixtures.
Price: $400
Send an e-mail to jkaz@kaztechnologies.com for details
Custom Dyno Testing
Kaz Technologies has the ability and experience to develop a test specific to your damper and application!
We can use vehicle data or create a custom wave form to test your dampers. We can also instrument your dampers with pressure transducers for additional data. Below are some of the custom tests we offer.
Damper pressure balancing
Multi-frequency testing
Custom waveform development and testing
Send an email to jkaz@kaztechnologies.com for details
