Kaz Technologies has over 30 years of damper expertise.  We have been doing damper design, development and testing since 1978.  We have developed dampers for motorsports champions in NASCAR, IndyCar, IMSA, WEC, Drag racing, Short track racing, and street cars.

 


1) Shock Dyno Testing

To see if your shocks are still as good as they were when new, we recommend having them performance tested at least once a year; it is critical to your suspension setup.

Performance test dyno data is provided for each shock for you to review.

Contact us for shipping information

*Our dyno uses clevis mounts to test shocks with mono ball ends. Please call or write about other fixtures*

   Price: $150.00 per shock

Add to Cart Button  

 

 

2) Rebuild your performance or race shocks:

Put your racing shocks into top notch working condition!

Have your race shocks rebuilt with all new seals, oil, and worn valve components, and a valve code dependent gas pressure before being tested on our dynamometer. We disassemble, clean and inspect each shock for any worn or damaged components. All seals and o-rings are replaced before re-assembling with fresh shock oil and the proper gas charge. Dyno curve data is provided for each shock. This price does not include replacement parts.

We have parts and tools in stock to rebuild your Penske, Ohlins or JRi shocks. Please call to discuss rebuilding other brands of shocks.

Contact us for shipping information

   Price: $750 per shock

Add to Cart Button  

 

 

3) Shock Valve Development

We can develop a custom valve code for your race shocks specific for your car’s suspension. We have experience with all brands of shocks and are familiar with racing series including NASCAR, IndyCar, IMSA, WEC, Drag racing, Short track racing, and street cars. You can specify the forces or we will develop the valve code to meet your performance specifications. After developing your custom valve code we will run a complete adjustment sweeps. Dyno curve data is provided for each shock. This price does not include new or replacement parts.

We have shock parts available for Penske, JRi, Ohlins and Fox shocks. Please call us about development for other shock brands.

Contact us for shipping information

   Price: $1,500 per valve code

  Add to Cart Button

 

4) Dyno Test Shocks with Track Data

Knowing what forces and velocities your shocks are generating when your race car is on the track can be vital to your performance on the track. We will convert your car’s track data into a shock dyno test so you know exactly what forces the shocks generate on the track. With this data can analyze shock forces, velocities, response time, lag and hysteresis. A summary report of the results will be included with dyno data.

Note: We test the shocks as received. You supply shock displacement data recorded from the track. The data acquisition rate must be at least 100 Hz. We recommend a data acquisition rate of 500 Hz for best results.

Our dyno uses clevis mounts to test shocks with mono ball ends. Please call or write about other fixtures.

Contact us for shipping information

   Price: $2,000 (this include single drive file, and 4 shocks)

  Add to Cart Button

 

5) Custom Dyno Testing

Kaz Technologies has the ability and experience to develop a test specific to your shock and application! We can use vehicle data or create a custom wave form to test your shocks. We can also instrument your shocks with pressure transducers for additional data. Here are some of the custom tests we offer.

*Shock pressure balancing

*Multi-frequency testing

*Custom waveform development and testing

Call for pricing and options

Contact us for shipping information

Price: Call for pricing & options

Add to Cart Button

TOP